Linksys E2500 N600 User Manual Dual-Band Wi-Fi Router

Linksys E2500 N600 User Manual Overview

Linksys E2500 N600 User Manual – The Cisco Linksys E2500 ($ 99.99, coordinated) Advanced Dual-Band Wireless-N Router is a part of the new line of E-Series switches. On paper, the E2500, which replaces the Cisco E2000 ($ 119, 3 stars), is one step away from E1200 winner of the Editor’s Choice ($ 60, 4.5 stars) since the E2500 offers a dual-band network. Be that as it may, I found the performance of the E2500 a bit disconcerting. It did not exceed the performance of the E2000, the successful switch, in the 5 GHz band.

In any case, the E2500 is suitable for lighter vision and sound spills and for associating different devices, and has a modest value for a dual band switch. I suppose it was thought to address the problems of people who do more with their home systems than just surfing the Web however they do not need to bother with QoS, molding activities or high performance required by game fanatics or those that facilitate a Server or VoIP Devices. In the case that you have the normal home system, possibly a game console, a tablet or two, maybe an iPad and you need to have those devices associated; the E2500 will do the trick. However, it will not surprise you.

For customers looking for a switch to do a substantial duty job like large record exchanges and HD video outpouring, I suggest you take advantage of the additional money for the Cisco Linksys E4200 ($ 179, 4 stars) or the Netgear N600 Wireless Dual winning winner of the Editor -Band Gigabit Router ($ 170, 4.5 stars).

One way in which the E2500 exceeds the E2000 is with the product. Cisco has perfected Cisco Connect programming to a point where you can configure the switch in three stages, which will take about five minutes. As I discovered when I tested the E1200, the E2500 offers not only basic parental controls and visitor management, but also an incredibly simple approach to adding different PCs and devices to the switch.

As I also noticed with the E1200, Cisco solved the problem that I had in the models of a year ago, in which entering the configuration of the propelled switch caused that it did not have the capacity to enter the programming of Cisco Connect. In the current year’s models, without much stretching, I could move forward and backward.

The E2500 is equally pleasing: it has a matte, full dark finish (which I like much more than the polish of the E1200) and a brushed metal strip artisan deco on the best. The plan is moderate, with only four Fast Ethernet ports, one WAN port, comparing the LEDs of each port to show the status of availability and a restart capture.

Perceptive Peripherals will have noticed that the previous passage calls attention to a problem, and my first genuine disappointment with the E2500: the absence of Gigabit Ethernet availability. Why would Cisco put only 10/100 ports on a dual-band switch? Most likely, if you are on the market for a dual band, you presumably need to exploit the 5 GHz band to associate NAS devices, game carriers and other equipment to share and share content. Most of these devices today are equipped for Gigabit Ethernet, so the use of simple Fast Ethernet will revert to the home system, including them. According to Cisco, this was done to keep the expenses of the switch low.

In addition, four inward reception cables are included with 2×3 transmission / reception and a built-in loudspeaker built into the chip to increase range. While the performance was not as strong as I expected, the flag did not weaken if it was ideal along with the change, or if my laptop was 40 feet away.

I needed to contrast the E2500 and the E2000 performance. There is one worthy of diverse mention between the two; The E2500 is a simultaneous dual band and the E2000 is a selectable double band. The concurrent dual band provides two separate Wi-Fi systems; one in the 2.4 GHz band and the second in the 5 GHz band. The selectable double band also offers two channels, however, you can access a channel at any time. Concurrent is beneficial to associate different gadgets to a WLAN meanwhile, particularly the gadgets that spill video, VoIP or other high performance companies.

Consequently, I tested the E2500 in two ways. Initially, I used the default synchronous configuration mode, the mode that most clients would use for an ideal execution. Of course, the Cisco Connect schedule organizes the change in mixed mode (it supports b / g legacy remote clients) with the channel width set to “Auto” in the 5 GHz band and set to 20 MHz in the 2.4 band. Security is established as a matter of routine for WPA2 / WPA.

Linksys E2500 N600 User Manual PDF

Linksys E2500 N600 User Manual – download

Tags: